• division I warmly welcome customers to me visit the Secretary for guidance.
  • possible .
  • Our company has very strict quality management system, at 100% before shipment inspection to ensure that products are in full compliance with the requirements of the drawings. If the products in question actually took place, the responsibility of the responsibility of our company.
  • We will confirm more than After the money credited within 24 hours, according to the manner agreed with the customer shipped to the customer.
  • We will confirm more than After the money credited within 24 hours, according to the manner agreed with the customer shipped to the customer.
  • We usually adopted Information 30% deposit, the balance paid before shipment.
  • Our no minimum order quantity requirements.
  • 15 - 30 days.
  • In order to facilitate our customers and our company communication, division I with a we used and popular design software, such as CAD, Pro / E, Solidwork like, welcome to send drawings to us in the following file formats: dwg, dxf, pdf, JPG, stp, igs, png, gif, bmp, wmf, emf, svg, dwf, eps, sat, and so on.
  • You can by phone, email, or visit our factory for quote, under normal circumstances, we need you to provide your units and contact information, drawings or samples. Complete quote within 24 hours after confirmation and complete.
  • For post-processing, our company has a very comprehensive support services, such as:
    surface Remedy: oxidized white, black oxide, hard oxygen white, hard oxygen black, polished, black, sandblasting, painting and the like.
    Plating: gold, silver, chrome, zinc and so on.
    heat treatment are: quenching, normalizing, tempering, annealing, QPQ, carburizing.
  • Our processable material is rich and varied, specific see the following table:


    machinable materials commonly used categories
    serial Materials Type grade
    1 austenitic stainless steel SUS303, SUS304, SUS316, SUS416, SUS430, SUS431, SUS321, SUS310, SUS430 … et
    2 Carbon 20 #, 45 #, 50 # ... etc.
    3 alloy tool steel DF-2, XW-5, XW41, SKD11.SKD61 … et
    4 High Speed ​​Steel HSP-41, ASP-23, A2, A6 … et
    5 Double entry stainless steel S136, S136H, 440C, 17-4PH … et
    6 spring steel C1065, SUS 301 Spring, 65Wn … et
    7 aluminum Al2024, Al5052, Al6061 , Al6082, Al7075, Al2017, Al5056, Al5083 … et
    8 Copper Copper, Brass, Bronze … etc.
    9 plastic PVC, Bakelite, Derlin, AS Derlin, PC, Black Conductive Plastic, Telfon, Nylon … et
    10 engineering Semitron 410C, S1000, PEEK1000, ESD225, ESD420, ESD520HR ... etc.
    11 Ceramic ZrO2, ESD Ceramic ... etc.
    12 tungsten carbide CD 650, YT15, YW1 ... etc.
    More SmartCross please download: GPM material list.pdf